Cleanline

Model T-1000 

Power Rating

1kVA/900watts

Input

Vlotage 110-300Vac at 50% load, 160-300Vac at 100% load
Frequency 50 or 60Hz ±10%
Phase Single phase with ground
Power factor >0.99 @ nominal voltage (100% Load)

Output

Voltage 208/220/230/240Vac
Voltage regulation ±1%
Frequency 50 or 60Hz ±0.1% (Battery mode)
Overload recovery Auto transfer to UPS
UPS Design Technology True on-line double conversion, Full digitized microprocessor controlled
Crest factor 3 : 1
Hamonic distortion ≤2% THD (Linear load), ≤4% THD (Non-Linear load)
Output waveform Pure sinewave
Transfer time 0 ms

Efficiency

AC mode >90%, Battery mode >89%, ECO mode > 97%

Protection and Filtering

Surge protection 220V (IEEEC6100-4-5 level 3)
Overload protection UPS Automatic bypass if overload between 110% to 130% at 30 seconds and more than 130% at 1.5 seconds
Short circuit protection UPS Output cut off immediately or input fuse/circuit breaker protection

Battery

Type  Sealed, Maintenance-free lead acid batteries
Typical recharge time to 90%   4 hrs
Management Self-test
Battery protection  Cut off without draining any current when battery is low
Cold start (DC start)   yes
Back up time  15-30 minutes (Depending on computer load)
Expansion back up time Depending on customer required

Indicators

Status  UPS status, Load level, Battery level, Input/output voltage, Remaining backup time, and Fault conditions

Audible Alarm

Battery mode Sounding every 4 seconds
Low battery Sounding every second
Overload Sounding twice every second
Fault Continuously sounding
Diminsion 397 x 145 x 220 mm, Weight 12.5 Kgs

Environmental

Operating Temperature  0-40 °c
Relative humidity 0-95% (Non-Condensing)
Noise level <45dB@1 Meter

Interface

Smart RS232 Software supports windows family, Linux, Sun solarris,
IBM aix, Compaq true64, SGI IRIX, FreeBSD, HP-UX and MAC
USB Windows family and MAC OS
SNMP(option )Power management from SNMP manager and web browser

2 years warranty ( Onsite service )